Other information

RoHS and REACH directive

SubConn^® connectors are compliant with the latest revision of the RoHS and REACH directive.

Rubber

The measurements made on all rubber parts including 3D files are nominal values due to the fact that rubber shrinks during vulcanisation.

Termination

• Maximum wire size for micro contacts is 18 AWG
• Maximum 2 screens or conductors can be terminated per contact
  
  

Cable

• Nominal static cable bending radius = 10 x cable OD (unless specified otherwise in the datasheet)
• Nominal dynamic cable bending radius = 15 x cable OD (unless specified otherwise in the datasheet)
• All special polyurethane (PUR) cable specifications can be found online at www.macartney.com
  
  

Cable assembly

• All cable assemblies are measured from rubber connector face to rubber connector face
• Our standard cable assembly tolerances
  • +/- 1,5” (38,1 mm) <3 m length and + - 3% ˃3 m
  • Lower tolerances need approval from the production
  • Min. assembly length 8" (203 mm)

Hoses for pressure-balanced, oil-filled connectors

MacArtney holds a stock of recommended hoses for Pressure-balanced Oil-filled (PBOF) connectors.

• VersilonTM hose type C-210-A with 1/2” ID and 5/8” OD
• VersilonTM hose type C-210-A with 5/8” ID and 13/16” OD
• VersilonTM hose type C-210-A with 25.4 mm (1") ID and 31.8 mm (1 1/4") OD

Note: Please remember to order clamps at the same time as hoses.

Recommended oil for pressure balanced systems

• Recommended oil in oil-compensated systems
• DC 200/350 or PMX 200/350
  
  

Pressure PSI/BAR

Following files were added to your basket

Go to checkout Add more files